logo
  • Mill

    HAAS

    VF 2SS

    Super-Speed Vertical Machining Center; 30" x 16" x 20" (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 ipm (35.6 m/min) rapids, power-failure detection module.

    HAAS

    VF 4SS

    Super-Speed Vertical Machining Center; 50" x 20" x 25" (1270 x 508 x 635 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 ipm (35.6 m/min) rapids, power-failure detection module. Through spindle coolant.

    HAAS

    VF 4SS

    Super-Speed Vertical Machining Center; 50" x 20" x 25" (1270 x 508 x 635 mm), 40 taper, 30 hp (22.4 kW) vector drive, 12,000 rpm, inline direct-drive, high-speed 24+1 side-mount tool changer, 1400 ipm (35.6 m/min) rapids, power-failure detection module. Through spindle coolant.

    HAAS

    VF 5XT

    Vertical Machining Center; 60" x 26" x 25" (1524 x 660 x 635 mm), 40 taper, 30 hp (22.4 kW) vector drive, 10,000 rpm, inline direct-drive, 24+1 side-mount tool changer, 710 ipm (18 m/min) rapids, power-failure detection module.

    HURCO

    VM20

    Vertical Machining Center; 40" x 20" x 20" (1016 x 508 x 508 mm), 40 taper, 20 hp, 10,000 rpm, 20-pocket swing-arm tool changer

    HURCO

    VM20

    Vertical Machining Center; 40" x 20" x 20" (1016 x 508 x 508 mm), 40 taper, 20 hp, 10,000 rpm, 20-pocket swing-arm tool changer

    HURO

    VM10

    Vertical Machining Center; 25.9" x 15.9" x 20" (660 x 406 x 508 mm), 40 taper, 15 hp, 8,000 rpm, 20-pocket swing-arm tool changer

    Lathe

    HAAS

    ST10

    CNC Lathe; 9" x 16" (356 x 406 mm) max capacity, 1.75" (44 mm) bar, 16" (406 mm) swing, 15 hp (11.2 kW) vector drive, 6000 rpm, A2-5 spindle, 6.5" (165 mm) chuck, 12-station VDI turret, live x/z tooling capabilities.

    Router

    KOMO

    VR510

    The Komo VR510 CNC router has a 60” x 120” table. The axis travels are X=134, Y=84 and It has unidirectional repeatability +/- 0.0004” with an average feed rate of 300” per minute.

Machine shop

Machine Pic

Lathe

 

Home | Sheet Metal | Machining | Finishing | About Parks Metal Products
facebook